« previous next »
Pages: [1]   Go Down

Author Topic: Bespoke dry clutch plates?  (Read 340 times)

Justin Gladwell

  • Jr. Member
  • **
  • Posts: 56
Bespoke dry clutch plates?
« on: March 06, 2021, 10:26:38 AM »
I'm looking for friction clutch plates (preferably aluminium with dry linings) of 98mm ID, 127mm OD (not including the tabs). 16 tabs of 10.5mm width and 3mm thick. The overall diameter is 133mm with the tabs so anything larger than this and smaller than 98mm ID could be cut to suit. Many thanks.
Logged

Will Loder

  • Full Member
  • Full Member
  • ***
  • Posts: 172
Re: Bespoke dry clutch plates?
« Reply #1 on: March 06, 2021, 10:50:56 AM »
I've made my own dry clutch plates before by cutting them out of surflex plates for a Norton commando.
Logged
Cheers,

Will Loder

Justin Gladwell

  • Jr. Member
  • **
  • Posts: 56
Re: Bespoke dry clutch plates?
« Reply #2 on: March 06, 2021, 11:03:31 AM »
Thanks Will. Would you know the ID and OD of the Commando plates? Did you use the sintered?
Cheers.
Logged
Pages: [1]   Go Up
« previous next »